How Many Square Feet Is a 30x40 Room?
A 30 ft × 40 ft room equals 1,200 square feet. Use the calculator below to double-check or customize with waste and cost.
Last updated:Tip: If you only have the diameter, divide by 2 to get the radius.
L-shape = two rectangles sharing a corner.
Add one row per rectangle and we'll sum them.
Key Measurements for a 30x40 Room
| Metric | Value |
|---|---|
| Floor area | 1,200 sq ft |
| Floor area (m²) | 111.48 m² |
| Floor area (sq yd) | 133.33 sq yd |
| Perimeter | 140 ft |
| Diagonal (longest straight line on the floor) | 50.00 ft |
| Aspect ratio (long side ÷ short side) | 1.33 |
| Dimensions in meters | 9.14 m × 12.19 m |
| Baseboard length (perimeter less one 3 ft door) | 137 linear ft |
| Air volume at an 8 ft ceiling | 9,600 cu ft |
| Share of the median new US home (2,142 sq ft) | 56.0% |
| Wall area (8 ft ceiling) | 1,120 sq ft |
| Wall area (9 ft ceiling) | 1,260 sq ft |
| Wall area (10 ft ceiling) | 1,400 sq ft |
Worked Example: 30 × 40 Step by Step
Every number on this page comes from these four arithmetic steps. Nothing here is a lookup table or a rounded estimate from a third party — if you can multiply, you can check all of it.
- Floor area. 30 ft × 40 ft = 1,200 sq ft. In metric: 1,200 × 0.09290304 = 111.48 m² (the factor 9.290 304 E-02 m² per ft² is exact, per NIST SP 811 Appendix B.8).
- Perimeter and diagonal. Perimeter = 2 × (30 + 40) = 140 ft. Diagonal = √(30² + 40²) = √2500 = 50.00 ft — the longest rigid object that can lie flat on this floor.
- Net wall area to paint. 140 ft × 8 ft ceiling = 1,120 sq ft gross, less 21 sq ft for one 3 ft × 7 ft door and 30 sq ft for two windows = 1,069 sq ft. At an assumed 350 sq ft per gallon that is 4 gallons for one coat and 7 for two — check the coverage figure printed on the can you actually buy.
- Material order. 1,200 sq ft × 1.10 (straight-lay waste) = 1,320 sq ft to buy; × 1.15 (diagonal lay) = 1,380 sq ft.
Room Shape: Diagonal, Aspect Ratio, and Metric Dimensions
Two shape numbers that a square-foot figure hides, both derived from 30 × 40:
- Diagonal 50.00 ft. A 30×40 floor takes a rigid item up to 50.00 ft long only if it lies flat on the floor diagonally — a 50.0-ft sofa, board, or mattress length that will not fit straight along either wall may still go in corner-to-corner. Real deliveries are limited by stairwells and door openings, not by this number, so treat it as the ceiling case.
- Aspect ratio 1.33. The long side is longer than the short side, so zoning (sleeping at one end, storage or seating at the other) works better than one central arrangement. Long rooms also waste more plank material at butt joints than square ones.
- Metric dimensions. 30 ft = 9.14 m and 40 ft = 12.19 m, so this room is 9.14 m × 12.19 m = 111.48 m². In millimeters — the unit imported flooring and furniture spec sheets are quoted in — 30 ft is exactly 9,144 mm and 40 ft is exactly 12,192 mm, because one foot is defined as exactly 304.8 mm.
Does a 30x40 Room Meet Code Minimums?
The residential code sets minimums, not typical sizes. The table below subtracts the two numbers that actually gate a bedroom from 1,200 sq ft with a 30 ft short side:
| Requirement (2018 IRC as adopted in a municipal adoption document) | Value for this room | Result |
|---|---|---|
| Habitable room floor area, at least 70 sq ft (kitchens excepted) | 1,200 sq ft | Meets it, with 1,130 sq ft of margin |
| No horizontal dimension under 7 ft (kitchens excepted) | short side 30 ft | Meets it, short side is 23 ft over |
| Aggregate glazed (window) area, at least 8% of floor area | 96.0 sq ft | Minimum window light for 1,200 sq ft |
| Openable ventilation, at least 4% of floor area | 48.0 sq ft | Minimum opening that must actually open |
| Ceiling height, habitable space at least 7 ft (baths 6 ft 8 in) | 8,400 cu ft at 7 ft | At an 8 ft ceiling this room holds 9,600 cu ft of air |
| Emergency escape and rescue opening (sleeping rooms) | 5.7 sq ft net clear, ≥24 in high × ≥20 in wide, sill ≤44 in | Required in every bedroom regardless of size |
Read this as arithmetic, not legal advice. These are the numbers from a city's published 2018 IRC adoption document; states and localities amend Chapter 3 (Georgia, for example, deleted the "other rooms" clause outright), and additions, attic conversions and rentals each bring extra rules. Confirm with your own building department before you design to the minimum.
The floor-area rule is written for habitable rooms and excludes kitchens — a bathroom, closet, or laundry is not covered by the 70 sq ft figure. Benchmark: ANSI Z765-2021 governs how square footage is measured, not how large a room must be.
How Big Is 1,200 sq ft Next to a Whole House?
The US Census Bureau's 2025 Characteristics of New Housing reports that the median size of a completed single-family home was 2,142 square feet. So this one room is 56.0% of the median new home — the median new home would fit 1 rooms this size. It is 133.33 sq yd, and against the 70 sq ft code floor for a habitable room it is 17.14× that minimum.
Common Uses for a 30x40 Space
- pole barn
- small warehouse
At 1,200 sq ft, this falls in the xlarge category — best suited for two-car garages, workshops, or open great rooms.
Best Furniture Layout for a 30x40 Room
At 1,200 sq ft, a 30x40 pole barn behaves like a small building bay — plan vehicle, equipment, or storage aisles first (typically 4–5 ft wide), then fill perimeter walls with shelving or workbenches. The long, narrow layout determines whether you park lengthwise or crosswise.
- Commercial xlarge bay: pallet rows with 8 ft forklift aisles along the length.
- Workshop: table saw infeed along one 20+ ft wall + assembly table in center.
- Warehouse staging: dock-high storage along perimeter + 12 ft clear center aisle.
30x40 vs Other Common Room Sizes
If you are deciding between two footprints, compare total square footage and how each layout affects furniture clearance — not just the length and width numbers.
- 24×40 — 240 sq ft smaller — a tighter footprint with less furniture clearance.
- 30×50 — 300 sq ft larger — more seating or storage options.
How Much Flooring Will You Need?
Wondering how much flooring do I need for a 30x40 room? The floor area is 1,200 sq ft — buy that much plus a waste allowance. The allowance is not one number: it depends on the laying pattern, because every angled cut throws away a piece that cannot start the next row.
| Lay pattern / material | Typical waste | Sq ft to order for 1,200 sq ft |
|---|---|---|
| Straight (grid) plank, laminate, LVP, hardwood | 5–10% | 1,260–1,320 sq ft |
| Running bond / offset tile | 10% | 1,320 sq ft |
| Diagonal (45°) tile or plank | 15% | 1,380 sq ft |
| Hexagon / basketweave | 12–15% | 1,345–1,380 sq ft |
| Herringbone | 15–20% | 1,380–1,440 sq ft |
| Chevron | 18–22% | 1,416–1,464 sq ft |
| Carpet (roll, straight) | 10% | 1,320 sq ft = 147 sq yd |
The ranges above are trade guidance for tile and plank layouts, not a code requirement. Two adjustments matter on a 30×40 floor: this room's aspect ratio is 1.33 — a rectangular room, where the offcut left at the end of a row is less likely to be the exact piece the opposite wall needs, so budget the upper half of the range; and outlets, pipes, and cabinet corners typically add another 3–7% on top of the pattern figure. DIY breakage adds 2–5% more.
Need an exact estimate? Use our Flooring Calculator for plank count, or the Tile Calculator for boxes of tile.
How Many Gallons of Paint for a 30x40 Room?
Do not paint the door. Gross wall area at an 8 ft ceiling is 140 ft × 8 ft = 1,120 sq ft; taking out one 3 ft × 7 ft door (21 sq ft) and two windows (30 sq ft) leaves 1,069 sq ft of wall to paint.
| Ceiling height | Gross wall | Net wall (less door + 2 windows) | Coats | Gallons |
|---|---|---|---|---|
| 8 ft | 1,120 sq ft | 1,069 sq ft | 1 | 4 |
| 8 ft | 1,120 sq ft | 1,069 sq ft | 2 | 7 |
| 9 ft | 1,260 sq ft | 1,209 sq ft | 1 | 4 |
| 9 ft | 1,260 sq ft | 1,209 sq ft | 2 | 7 |
The coverage number is an assumption, not a fact. These gallons are calculated at 350 sq ft per gallon, which is the middle of the band most interior paints quote. Read the back of the can you actually buy — 300 sq ft and 400 sq ft per gallon are both common, and one coat over a dark wall needs a third pass no table can tell you. Add a quart of primer for patched or repaired areas, and remember the ceiling is a separate 1,200 sq ft.
Detailed breakdown on our Paint Calculator.
Is a 30x40 Room Big?
This is a spacious footprint — think workshop, pole barn, or open-plan great rooms in larger homes.
Two numbers to anchor that judgment: the Census 2025 median completed single-family home is 2,142 sq ft, so this room is 56.0% of a whole house; and the 2018 IRC floor for a habitable room is 70 sq ft with no side under 7 ft (kitchens excepted), which this footprint clears.
What a 30x40 Addition Costs to Build
There is no honest per-square-foot price for a 30x40 room from a national table, and most pages that print one are quoting a range wider than the number they are trying to pin down. What is verifiable is the national median for a whole contractor-built home: NAHB's analysis of the Census Survey of Construction puts custom (contractor-built) single-family homes at a median of $166 per square foot of floor space for starts in 2024, up from $162 in 2023 — and that figure excludes the value of an improved lot, grading, utilities, plans, permits, and profit on site work.
Applied to 1,200 sq ft, that median is a yardstick rather than a quote:
| Arithmetic | Result | What it does and does not mean |
|---|---|---|
| 1,200 sq ft × $166/sq ft | $199,200 | Whole-house median cost per square foot. A 30×40 addition is a small, one-off job: mobilization, permits and a single trade crew mean per-square-foot costs for small additions normally land above a production-home median, not at it. |
| 1,200 sq ft × your quote ÷ 1,200 | your $/sq ft | The only number that describes your project. Divide each bid by 1,200 and compare bids on that, after you have confirmed which one includes the items the Census median excludes. |
For the full breakdown of what the SOC medians include, the regional spread, and why "turnkey" and "per square foot" are not the same spendable amount, read our Cost to Build a House in 2026 guide, or run a number through the Cost per Square Foot Calculator.
Frequently Asked Questions
How many square feet is 30x40?
30 × 40 = 1,200 square feet.
How many square meters is 30x40?
111.48 m² — 1,200 sq ft × 0.09290304 (the exact NIST conversion factor for square feet to square meters).
What are the metric dimensions of a 30x40 room?
30 ft = 9.14 m and 40 ft = 12.19 m, so the room is 9.14 m × 12.19 m. One foot is exactly 0.3048 m.
What is the diagonal of a 30x40 room?
√(30² + 40²) = √2500 = 50.00 ft. That is the longest straight object that can lie flat on the floor and reach corner to corner.
Is a 30x40 room a legal bedroom?
On the two size tests, yes: 1,200 sq ft is above the 70 sq ft minimum for a habitable room, and the short side of 30 ft is above the 7 ft minimum for any horizontal dimension. A sleeping room additionally needs an operable emergency escape and rescue opening (5.7 sq ft net clear, at least 24 in high by 20 in wide, sill no more than 44 in above the floor) and a code-required heating source, so "big enough" is only part of "legal". States and localities amend the code, so confirm with your building department.
How big is 30x40 compared to a whole house?
56.0% of the median new US home. The Census Bureau reports the median size of a completed single-family home as 2,142 square feet (2025 Characteristics of New Housing), and this room is 1,200 sq ft.
How much baseboard do I need for a 30x40 room?
Perimeter is 140 ft; deduct one 3 ft door opening and order 137 linear ft, plus a few feet for the miter offcuts at corners. Add the door casing separately (22 linear ft for one door).
How many tiles will fit in a 30x40 room?
Depends on tile size. 12"×12" tiles = 1,320 tiles (with 10% waste). See our Tile Calculator for 6", 18", and 24" sizes.
How much carpet do I need for a 30x40 room?
133.33 sq yd minimum, or 146.67 sq yd with 10% waste for cuts and seams.
How many gallons of paint for a 30x40 room?
140 ft × 8 ft = 1,120 sq ft of gross wall; less a door and two windows that is about 1,069 sq ft to paint. At an assumed 350 sq ft per gallon, one coat needs 4 gallons and two coats need 7. Use the coverage printed on your can — 300 to 400 sq ft per gallon is the usual band.
How much flooring do I need for a 30x40 room?
1,200 sq ft of floor area. Straight-lay waste of 10% means ordering 1,320 sq ft of laminate, hardwood, or LVP; a diagonal layout needs 1,380 sq ft and herringbone up to 1,440 sq ft. See the Flooring Calculator for box counts.
What furniture fits in a 30x40 room?
Commercial xlarge bay: pallet rows with 8 ft forklift aisles along the length.
Sources and How to Check This Page
Every number on this page is arithmetic on 30 × 40, plus four external figures that are quoted, not invented. Worked through:
- Unit conversions — NIST Special Publication 811, Appendix B.8: 1 ft² = 9.290 304 E-02 m² and 1 ft = 3.048 E-01 m, listed as exact factors. nist.gov — SP 811 Appendix B.8
- Median new-home size (2,142 sq ft) — US Census Bureau, Characteristics of New Housing Highlights, 2025 edition: "The median size of a completed single-family home was 2,142 square feet." census.gov — CHARS Highlights
- Room minimums (70 sq ft / 7 ft / 8% light / 4% ventilation / 7 ft ceilings / 5.7 sq ft egress) — 2018 IRC sections R303.1, R304, R305 and R310 as published in a municipal adoption document. bullheadcityaz.gov — 2018 IRC attachment. This is one city's adopted text; states amend Chapter 3, so check your own jurisdiction.
- Build cost median ($166/sq ft, lot excluded) — NAHB analysis of the Census Survey of Construction, "Square Foot Prices Moderate in 2024" (2 October 2025). eyeonhousing.org — Square Foot Prices Moderate in 2024
- Waste allowance by pattern (5–10% straight, 15% diagonal, 15–20% herringbone, 18–22% chevron; aspect ratio adds 2–5%) — trade guidance for tile layouts, not a code requirement. tilecalculators.com — tile waste by pattern
Not sourced, and labeled as such wherever it appears: the 350 sq ft per gallon paint coverage used in the paint table. We could not fetch a manufacturer technical sheet to back a single number, so it is stated as an assumption — the figure on your own can is the one to use.
Measured area rules differ from room-size rules: ANSI Z765-2021 (the standard appraisers use for above-grade and below-grade living area) governs how square footage is measured; see ncrec.gov — Residential Square Footage Guidelines vs ANSI Standard and our Average Room Sizes in American Homes report.